Product Specifications Acetylene Air Ammonia Mix Argon Argon Mix Benzene Mix Butane Mix Carbon Dioxide Carbon Dioxide Mix Carbon Monoxide Carbon Monoxide Mix Ethane Mix Ethylene Mix Ethylene Oxide Mix Helium Helium Mix Hexane Mix Hydrogen Hydrogen Mix Hydrogen Sulfide Mix Isobutylene Mix Krypton Methane Methane Mix Neon Nitric Oxide Mix Nitrogen Nitrogen Mix Nitrogen Dioxide Mix Nitrous Oxide Nitrous Oxide Mix Oxygen Oxygen Mix Propane Mix Propylene Mix Sulfur Dioxide Mix Sulfur Hexafluoride Sulfur Hexafluoride Mix Toluene Mix Biological Mixtures Electron Capture Mixtures Enviro-Cyl Pure & Rare Mixes Flame Ionization Mixtures Laser Gas Mixtures Leak Detection Mixtures One-Timers Cylinder Mixes

Pure Gases, Rare Gases & Specialty Mixtures in Enviro-Cyl Cylinders

Pure & Rare Gases	Two-Part Mixtures
Acetylene Air Argon Carbon Dioxide Carbon Monoxide Helium Hydrogen Krypton Methane Neon Nitrogen Nitrous Oxide Oxygen Sulfur Hexafluoride Click on the links above for purity information. * Other pure gases available upon request. Please contact our sales department for availability and lead time.	Ammonia - Call for availability Argon Benzene Butane Carbon Dioxide Carbon Monoxide Ethane Ethylene Ethylene Oxide - ask about our ETO Kit Helium Hexane Hydrogen Hydrogen Sulfide Isobutylene Methane Nitric Oxide Nitrogen Nitrogen Dioxide Nitrous Oxide Oxygen Propane Propylene Sulfur Dioxide Sulfur Hexaflouride Toluene Click on the links above for mixture specifications and balance gas availability. * Other mixes available upon request. Please contact our sales department for details.
Multi-Component Mixtures
Please contact our sales department for multi-component mixture information and availability.

Important Facts for Ordering Gas Mixtures

Our technical staff will be pleased to discuss your application, and the details involved in producing mixtures to your specific requirements. There are numerous restrictions in producing gas mixtures, a few of these are discussed in the following paragraphs.

• Reactive Gas Mixtures: Certain gases react with the internal walls of the cylinder, affecting the stability of the desired gas mixture. SpecAir uses treated aluminum cylinders for gas mixtures of this type. These specially prepared cylinders will maintain stability of reactive gas components such as SO2, H2S, NO, and NO2 in low concentrations.
  
  Some gases can react with others in the cylinder under high pressure conditions causing unstable mixtures or unwanted side products. If request a mixture of this nature, our Technical staff will advise you of possible side reactions and provide you with options.
  
• Mixtures of Oxidizers and Flammable Gases: Certain concentrations of flammable gases can be produced provided they meet certain safety criteria. A general rule is that the desired concentration does not exceed 50% of the lower flammability limit of the desired gas. Other mixtures are available provided the lie above or below the flammable range, or they are low in oxidizer content.
  
• Cylinder Pressure: Certain components with low vapor pressures can be mixed in the gas phase at reduced cylinder pressure. Mixtures of this type include many organic chemicals which are normally liquids at room temperature.
  
  Mixtures of this type will have a higher cylinder pressure as the desired concentration of the low vapor pressure components is reduced.
  
• Cylinder Outlet Connection: SpecAir chooses cylinder valve outlet connections in accordance with CGA guidelines. This system provides elements in safety and compatibility to protect both the user as well as the producer of the gas mixture. for all mixtures, the proper connections is determined after the composition and concentration has been specified.

Please contact our Technical Support staff if you have any questions.