Product Specifications Acetylene Air Ammonia, anhydrous Argon Benzene Butane Carbon Dioxide Carbon Monoxide Ethane Ethylene Ethylene Oxide Helium Hexane Hydrogen Hydrogen Sulfide Isobutylene Krypton Methane Neon Nitric Oxide Nitrogen Nitrogen Dioxide Nitrous Oxide Oxygen Propane Propylene Silane Sulfur Dioxide Sulfur Hexafluoride Toluene Xenon Biological Mixtures Electron Capture Mixtures Enviro-Cyl Pure & Rare Mixes Flame Ionization Mixtures Laser Gas Mixtures Leak Detection Mixtures One-Timers Cylinder Mixes

PR 160 Calibration Gas Regulator

Calibration gas regulators are for use with refillable or disposable cylinders. These regulators are designed for non-corrosive gas service and are single stage, piston style regulators. The control valve permits constant gas flow and easy on/off.

Each regulator comes with a cylinder pressure gauge and is available in seven preset flow models. This series of regulators is recommended for use with non-corrosive gas using a 5/8" -18 valve.

PR 160 Features

• Piston type construction
• Preset flow ratings
• On/off valve
• 1 1/2" x 1200 psig gauge

PR 160 Specifications

• Maximum Inlet Pressure - 1000 psig
• Outlet flow settings
• 0.25 LPM
• 0.50 LPM
• 1.00 LPM
• 1.50 LPM
• 2.50 LPM
• 5.00 LPM
• 6.00 LPM
• Inlet fitting - 5/8"-18 INF (C-10)
• Outlet fitting - 3/16" hose barb
• Temperature Operating Range -0-140o F (-17oC to -60oC)

Materials of Construction

• Body - Chrome plated
• Spring housing cap - Chrome-plated brass bar stock
• Seat - Teflon
• Piston - Brass
• Piston "O" rings - Buna-N

PR 160 Typical Applications

• Refillable or disposable cylinders of Non-corrosive gases
• One-Timers
• Enviro-Cyl

Model PR 160 Ordering Information

Model Number	Flow Rate
PR160-025	0.25 LPM Air
PR160-05	0.5 LPM Air
PR160-1	1.0 LPM Air
PR160-15	1.5 LPM Air
PR160-25	2.5 LPM Air
PR160-5	5.0 LPM Air
PR160-6	6.0 LPM Air