Product Specifications Acetylene Air Ammonia, anhydrous Argon Benzene Butane Carbon Dioxide Carbon Monoxide Ethane Ethylene Ethylene Oxide Helium Hexane Hydrogen Hydrogen Sulfide Isobutylene Krypton Methane Neon Nitric Oxide Nitrogen Nitrogen Dioxide Nitrous Oxide Oxygen Propane Propylene Silane Sulfur Dioxide Sulfur Hexafluoride Toluene Xenon Biological Mixtures Electron Capture Mixtures Enviro-Cyl Pure & Rare Mixes Flame Ionization Mixtures Laser Gas Mixtures Leak Detection Mixtures One-Timers Cylinder Mixes

PR 150 Calibration Gas Regulator

Calibration gas regulators are for use with disposable cylinders. These regulators are designed for non-corrosive gas service and are single state, piston style regulators. The control valve permits constant gas flow and easy on/off.

Each regulator comes with a cylinder pressure gauge and is available in four preset flow models. This series of regulators is recommended for use with disposable cylinders of non-corrosive gas using a CGA 600 valve.

PR 150 Features

• Piston type construction
• Preset flow ratings
• On/off valve
• 1 1/2" x 700 psig gauge

PR 150 Specifications

• Maximum Inlet Pressure - 500 psig
• Outlet flow settings
• 0.25 LPM
• 0.50 LPM
• 1.00 LPM
• 1.50 LPM
• Inlet fitting - CGA 600
• Outlet fitting - 3/16" hose barb
• Temperature Operating Range - 0-140o F (17oC to -60oC)

Materials of Construction

• Body - Brass Bar Stock
• Spring housing cap - Chrome-plated brass bar stock
• Seat - Teflon
• Piston - Brass
• Piston "O" rings - Buna-N

PR 150 Typical Applications

• Disposable cylinders of Non-corrosive gas
• One-Timers

Model PR 150 Ordering Information

Model Number	Flow Rate
PR150-025-600	0.25 LPM Air
PR150-05-600	0.5 LPM Air
PR150-1-600	1.0 LPM Air
PR150-15-600	1.5 LPM Air