The HPT 100 is a small
two-stage brass bar stock regulator designed specifically for
calibration mixtures and high purity gases, for gas chromatography,
and other laboratory instrumentation applications.
The regulator construction
features two stainless steel diaphragms that will not contaminate
the gas stream, and are resistant to inboard diffusion. Design
also features low dead space (internal volume), which minimizes
particle generation.
- 1.375" 316L Stainless steel diaphragm
- 1.5" Chrome gauges
- Small size is ideal for remote CEM applications
- Chrome plated outlet control valve (1/4" NPT) (M)
- Chrome plated body, housing cap, fittings and gauges
- Self reseating relief valve (not designed to protect downstream
apparatus)
- Maximum Inlet Pressure - 3000 psig
- Outlet Pressure Ranges
- 15 (2-15 psig)
- 80 (4-80 psig)
- 125 (5-125 psig)
- Temperature Operating Range - 0o
to 140o (-17o to 57o C)
- Outlet pressure rise - Less than 0.1 psig
per 100 psig inlet decay
- Production models are tested to 1 x10-6
scc/sec inboard helium leak rate
- Body - Chrome plated Brass Bar Stock
- Spring housing cap - Chrome plated Brass
Bar Stock
- Diaphragm - 301 Stainless Steel
- Nozzles - Brass
- Seats - 1st Stage PCTFE
- 2nd Stage Viton Seals.......................................Nylon
and Viton
- Filter - 46 micron sintered Stainless Steel
- Seat return spring - Stainless Steel
- Pressure adjusting spring - Heat treated
spring steel
- Adjusting Knob - ABS (Acrylonitrile-Butadine-Styrene)
- High-Purity Gas Handling
- Gas Chromatography
- Research Sampling Systems
- Continuous Emission Monitoring (CEM) Applications
- Laser Applications
- Controlled Atmosphere
|
