Series 7100 Depth Gas Filters - 0.2 Microns

The Series 7100 depth gas filters are the workhorses of laboratories and many high purity industrial processes. They are routinely used in critical gas lines and as pre-filters to extend the lifetime of more expensive filtration units. They are designed to provide high filtration efficiency at an economical cost.

The Series 7100 depth gas filters employ a microporous fiberglass media held in a 316 stainless steel all welded housing. They are available in two sizes that accommodate most flow requirements.

Series 7100 Features

100% filtration efficiency at 0.2 micron level
All welded 316 stainless steel construction provides compatibility with a variety of gases
Long service life - particles are collected in the filter matrix throughout the depth of the filter

Specifications

Filtration: 100% @ 0.2 microns
Max. Operating Pressure: 250 psig
Operating Temperature: 0o to 165o F (-17oC to 73oC)

Ordering Information

Type of End Connection	Model Number	Connection Size		Dimensions		Max. Flow @ 15PSIG Inlet SLPM
		Inlet*	Outlet^*	Inches
		Inlet*	Outlet^*	Length	Dia.
Standard Pipe	7110-P4FF	1/4" NPT Female	1/4" NPT Female	3.00	1.66	100
Standard Pipe	7120-P8FF	1/2" NPT Female	1/2" NPT Female	4.07	2.38	500
Tubing Compression	7110-T2FF	1/8" tubing compression	1/8" tubing compression	4.81	1.66	30
	7110-T4FF	1/4" tubing compression	1/4" tubing compression	4.09	1.66	100
	7120-T6FF	3/8" tubing compression	3/8" tubing compression	5.02	2.38	400
	7120-T8FF	1/2" tubing compression	1/2" tubing compression	5.30	2.38	500
VCR Compatible Face Seal	7110-V4MM	1/4" Face seal male	1/4" Face seal male	3.74	1.66	100
*Other end fitting configurations available on request